Price: £6950.00 £3950.00 (all prices include VAT as standard)
Product Information
The 8-seater Revolution Hot Tub - the ultimate symbol of a luxury lifestyle. With 28 massage jets, 1 Master Whirlpool Jet and a series of ergonomic seats for maximum comfort, you will be the envy of your friends with an 8-person Revolution Hot Tub!
Dimensions: 213.3cm x 244cm x 91.4cm. Colour: Revolution is available in a Bronze/Teak finish Weight: Approx 285kg (approx 1.5 tons when full) Capacity: 8 persons Elec Supply: 20amp Water Temperature: max 40°C Running Costs: Approx only 80p/day
Features: 28 Massage Jets, 2.5 hp pump, 2kw heater 1 Master Whirlpool Jet Stainless steel jets Ozone Generator - the Ozonator - kills germs Permawood cabinet Multi-coloured underwater LED light as standard Perimeter lighting Digital Controls Holds an amazing 1893 litres when full!
Permawood Design Insulated rigid Hot Tub cover Wooden Steps for easy-access
4 months chemical supply starter kit included - essential to clean the water, kill germs and more.
Our guarantees: 3 years for the pump, 2 years for the blower, 10 years for the acrylic shell, everything else is 1 year.
Still need further reasons? Right now we are offering a ridiculously low price on delivery and fitting to mainland GB - just the standard Bathroom-Envy charge of £2.50. Yes, you read that right - £2.50! (Although a little cup of coffee for our qualified installation experts might be nice too!)
Please allow 4-6 weeks delivery for this particular item.
*As with our other fixed Hot-Tubs, a list of pre-delivery steps need to be met including (for outdoor use) a minimum of 4-inch concrete base for the Hot Tub and armoured-cable (at least 4m in length). Please read through our Hot Tub Pre-Delivery Instructions below (links open in a new window), and also be sure to read our "Quick Guide for Buyers" section below for further information.
Your safety and happiness with our products is fundamental to our business, so we will work with you to advise on pre-delivery requirements, so you will have a hassle-free delivery and the Hot Tub of your dreams ready for action!
Buyer Information Documents: Hot Tub Location Guide Hot Tub Delivery Access Hot Tub Electrical Requirements
Quick Check Guide for Buyers
1. Delivery access
Check the width of doorways, passages and gates to make sure the spa can pass. Gates, fences and doors may need to be removed. Make sure there is nothing protruding, e.g., drainage pipes or sills. Also, check that there are no low branches or low roofing. This may hinder vertical clearance.
If there are any corners to your path, please check to see that the spa will pass.
Steep slopes, retaining walls or large amount of stairs could cause problems.
Under special circumstances, where there is no clear and easy route, a crane can be used to deliver your spa, at an extra cost to you.
2. Position of Spa
It is recommended that the position of your spa allows for easy access to the equipment inside your spa by the service engineers (24 inches or 60 cm).
A solid foundation is essential for your spa. It is your responsibility to provide such a foundation. If you are having your spa outdoors then a concrete base with a minimum thickness of 10 cm is advised. If you are having your spa indoors then you have to ensure that the flooring will not be damaged or spoiled by water. In either situation, you must ensure that the structure can withstand the weight of your spa with water and people.
3. Electrical Requirements
It is recommended that your spa be permanently connected (hard wire) to the power supply using:
A single-phase 240-volt power supply with a 30ma R.C.D (E.L.C.B) fitted at the fuse board. You will need to have an Isolator – minimum of 2 metres from the water, and a cable run to the back of the spa with a 4-metre tail.
We insist that a qualified electrician in accordance with IEE regulations carry out all work.
Be the first to review this product!
