Salamander ESP 140 CPV 4.3Bar Twin End Shower & Whole House Pump

Specifically for one/two bathroom systems where there is a need to boost baths, basins or showers which may be above and/or below the cold water storage tank Typically - flats, loft, barn conversions and for systems where there is a need for greater performance or flow, e.g. shower columns, steam cubicles and multiple body sprays.

ESP CPV twin systems are best suited for systems where there is a need for greater performance or flow, e.g. shower columns, steam cubicles and multiple body sprays.

Features:

• Positive Head and Negative Head
• Twin Pump 
• ESP 140 for tank fed shower and/or whole house systems in flats and houses but also where there may be body sprays in systems where the pressure requirements is up to 4.3 bar typically in pre-formed shower columns and cubicles

For technical and Delivery Info please click the relevant product tabs. For a description of the S Flange additional product option and its benefits please click the Features tab.

 All Salamander pumps are supplied with AV (anti-vibration) couplers in order to limit the transfer of motor and pump vibration to the associated pipe work.

The beneficial effect of AV couplers is lost if they are bent or twisted on installation.

Each Single or Twin pump is supplied with one or two each straight and angled AV couplers.  This arrangement of couplers facilitates the connection of the supply pipe work from any direction.

Not Sure Which Pump You Need? Simple!

   For help finding the correct pump that will suit you - please click this link or call the Salamander Team on 0845 377 9160 

For More Information On This Product And More In Salamander's Range Of Shower Pumps please click this link to browse through their produuct range.

Additional Features - The S FLANGE:

Salamander's uniquely different top entry DZR cylinder flange.

Plumbing is not an exact science and aeration of the supply water to showers and other outlets is a common problem.

When a pump is fitted to boost the supplies from the cold water storage tank and from the cylinder to showers, baths and basins the risk of aeration is increased many times.

Systems without a flange - will risk aeration of the supply water to the pump

Aeration - aerated supply water to pump and to showers and other outlets means an increased risk of:

• Unnecessary, perhaps sudden temperature fluctuation at the shower or other outlets.
• A noisy pump.
• Accelerated degradation of the pump's mechanical shaft seals eventually to leak.
• Premature pump breakdown

A correctly fitted Approved Cylinder flange will mitigate if not prevent these risks:

• A quiet life and peace of mind for the customer
• An easier life for plumbers

Technical Specification:

ESP CPV twin		ESP 100 CPV twin	ESP 140 CPV twin
Applications As ESP 50/75 CPV above but where there may also be shower columns, steam cubicles or body sprays.		As ESP 75 above but also where there may be body sprays in systems where the pressure requirements is up to 3 bar (100ft head).	As ESP 100 CPV and where the pressure requirement is up to 4.3 bar typically in pre-formed shower columns and cubicles.
Performance Closed head pressure Max amps/watts Rating		Quiet 100ft head (3 bar) 4 amps/960 watts Continuous	Quiet 142ft head (4.3 bar) 6 amps/1440 watts 20 min on/off
Key	Watercan Conventional spray Multifunction massage - champagne spray 3bar shower heads eg: Activa Body sprays Multiple body sprays
Pump Dimension Length x Width x Height		400 x 240 x 185mm	450 x 240 x 185mm

At Bathroom Envy we only use internationally respected firms such as FedEx and Parcelforce to deliver our products to your doorstep.

Delivery time at Bathroom Envy for this item is 1-5 working days.  If you wish to track your order please visit the FedEx website and enter your Courier Number into the relevant item tracking field.  If you don't have this information please contact our customer services team who will be happy to help you.

Please check our Terms & Conditions and Delivery Times menu pages for more information.